Dry straight-through drawing machines of SG-DDM series
High-performance innovative drawing machines of the SG-DDM series have many undeniable advantages in design and execution of the die holders on each drawing block with direct or indirect water cooling. Individual solution for single or double reduction using any type of dies (carbide, diamond, conical).
Sket-group implements in its solutions software that provides comprehensive control of equipment operating parameters, wire temperature during each drawing section, control of wire breakage at each drawing stage, and dust reduction systems.
As a part of individual approach and use of modern global solutions, the SKET-gorup company offers to implement any design of the drawing mill, including processing wire rod up to 24 mm and drawing speeds up to 50 m/s.
Technical characteristics of SKD series drawing machines
|
Model name |
SKD560 |
SKD600 |
SKD800 |
SKD900 |
SKD1000 |
SKD1200 |
|
Drum diameter (mm) |
560 |
600 |
800 |
900 |
1000 |
1200 |
|
Number of blocks |
2-14 |
2-12 |
2-10 |
2-10 |
2-9 |
2-9 |
|
Motor power (kW) |
22-45 |
30-45 |
45-75 |
75-132 |
90-132 |
90-160 |
|
Maximum outlet diameter (mm), low carbon steel |
7.0 |
8.0 |
12 |
16 |
18 |
20 |
|
Maximum outlet diameter (mm), high carbon steel |
6.5 |
7.0 |
10 |
13 |
13 |
16 |
|
Minimum outlet diameter (mm) |
1.4 |
1.6 |
2.6 |
3.0 |
3.5 |
4.0 |
|
Maximum speed of drawing (m/s) |
20-15 |
18-12 |
16-8 |
15-7 |
14-6 |
12-6 |