Wet drawing machines
Energy-efficient, due to reduction in overall dimensions, the drawing mills of the SG-WDM series are equipped with dry-type fiber holders for maximum drawing accuracy with reduction from 10 to 30%; the compensating unit is located directly on the drawing mill, which ensures ideal drawing stability.
Sket-group implements in its solutions innovative technology for scalping aluminum wire with a diameter of up to 9 mm and a centralized cooling system for two scalping units.
As part of the individual approach and use of modern global solutions, the SKET-group company offers to implement any design of the wet drawing machine.
Wet drawing machine for wire of large diameter
Typical model characteristics
|
Model name |
WDM8/650-560 |
WDM11/650-560 |
WDM13/650-560 |
WDM15/650-560 |
WDM17/650-500 |
WDM11/450 |
WDM13/450 |
WDM15/450 |
WDM17/450 |
|
Drum diameter (mm) |
350-400 |
350-400 |
350-400 |
250-350 |
250-350 |
200 |
450 |
450 |
450 |
|
Number of blocks |
8 |
11 |
13 |
15 |
17 |
11 |
13 |
15 |
17 |
|
Maximum outlet diameter (mm), low carbon steel |
Ф8-Ф6.5 |
Ф8-Ф6.5 |
Ф8-Ф6.5 |
Ф8-Ф6.5 |
Ф8-Ф6.5 |
Ф4.5 |
Ф4.5 |
Ф4.5 |
Ф4.5 |
|
Drawing speed (m/min) |
200 |
250 |
250 |
280 |
280 |
260 |
280 |
300 |
300 |
|
Reduction rate (%) |
78.7 |
88.54 |
90.53 |
93.94 |
95.36 |
85.73 |
90.23 |
92.89 |
95.06 |
|
Average reduction rate (%) |
17.58 |
17.88 |
16.58 |
17.05 |
16.52 |
16.22 |
16.44 |
16.16 |
16.22 |
|
Motor power (kW) |
160-132 |
160-132 |
160-132 |
132-110 |
132-110 |
90 |
75 |
75 |
75 |
Wet drawing machine for wire of medium and small diameter
Typical model characteristics
|
Component |
WDM11-350(450) |
WDM13-350(450) |
WDM15-350(450) |
WDM15-250(350) |
WDM17-250(350) |
WDM19-200 |
|
Drum diameter (mm) |
350-450 |
350-450 |
350-450 |
250-350 |
250-350 |
200 |
|
Number of blocks |
11 |
13 |
15 |
15 |
17 |
19 |
|
Maximum outlet diameter (mm), low carbon steel |
Ф4.0-Ф2.8 |
Ф4.0-Ф2.8 |
Ф4.0-Ф2.8 |
Ф2.8-Ф1.6 |
Ф2.6-Ф1.4 |
Ф1.3-Ф1.0 |
|
Minimum outlet diameter (mm) |
Ф1.6-Ф1.2 |
Ф1.4-Ф0.8 |
Ф1.2-Ф0.7 |
Ф0.7-Ф0.50 |
Ф0.6-Ф0.35 |
Ф0.3-Ф0.25 |
|
Drawing speed (m/min) |
280 |
300 |
300 |
360 |
420 |
480 |
|
Reduction rate (%) |
84 |
88 |
92 |
92 |
94 |
95 |
|
Average reduction rate (%) |
15 |
15 |
15.5 |
15.5 |
15.5 |
14.5 |
|
Motor power (kW) |
75-45 |
75-45 |
37-18.5 |
37-18.5 |
30-15 |
15-7.5 |